Here's a TR-SC10E project that is so quick and easy, I almost didn't bother to post it on the blog...
I added some TR-MT10E EVA Tape (foam tape) to my SC10E battery tray to help protect my LiPo batteries a little.
Here's the stock TR-SC10E battery tray:
And this is the battery tray after adding the TR-MT10E foam tape:
That's about as simple and easy of an upgrade as can be. I probably should have done a better cleaning job of the battery tray before installing the tape but I think it will work okay.
By the way, if you found this helpful, please do me a HUGE favor and support me by purchasing your TR-SC10E parts and hop-ups from me and also by using my Amazon links if you make any purchases at Amazon (they'll pay me a small commission)
Part 1 - New Body
Part 2 - ESC Mount
Part 3 - Front Bumper
Part 4 - Wheel Nuts
Part 5 - Aluminum Rear Hubs and Aluminum Steering Knuckles
Part 6 - Rear End Upgrades
Part 7 - Front End Upgrades
Part 8 - Ball Cups
'till next time
Comments are closed.